Is your furnace making unusual noises? Or have you observed that your unit is blowing cold air when you’re expecting a comfortable blast of warm air? If so, it could be a signal that your HVAC equipment is about to fail amid this cold winter season and you might need furnace repair. Here are some common warnings that you shouldn’t neglect when it comes to your furnace:
If you hear a loud scraping sound that sounds like metal on metal, there is quite possibly something wrong with the blower wheel. If you hear a sound like this, turn off your furnace promptly and call Service Experts Heating & Air Conditioning to investigate the furnace. There are multiple things that could be wrong with the blower wheel. First, it might just be loose and if the piece is not too damaged, can be tightened. Second, it might be that the blower wheel is broken and will need replacement. Or third, it might be that the motor mount is what broke, causing the complete blower assembly to shake uncontrollably.
Loud Bang When Furnace Starts
If there is a loud pop when your furnace turns on, there are a couple of things that could be occurring. Two typical culprits are a dusty furnace burner or ignitor. A dirty furnace burner or ignitor could prevent the burners from igniting, causing gas to build up. When the gas finally does ignite, it will create the loud bang you hear. This could result in a safety problem, especially if one of these small explosions caused the heat exchanger to crack. Not only could that result in a carbon monoxide leak, but you would end up having to replace the heat exchanger, which could be very costly.
Expanding and contracting air ducts can also cause loud bangs after the heating system blower starts up. This is a common complaint for homeowners with metal ducts. If your furnace is making the loud boom and it is produced by your air ducts, it could be a symptom of undersized ducts, obstructed vents, or a clogged air filter.
If you hear a high-pitched noise, it could be the shaft bearings are in need of oil, there is an issue with the blower belt, or the blower motor is not functioning properly. A seasonal furnace tune-up will help identify these issues before they become big problems.
Cold Air Blowing From Heating System
There are a few reasons why your heating equipment could be giving off cold air. It might sound minor, but the thermostat is the first thing you want to consider. It’s the starting place for any furnace technician, also. Confirm the system is set to “auto” and not “on.” If the thermostat is set to “on,” your heating system will blow continuously, even when it isn’t heating the air being released, thus blasting cold air. Flipping it to “auto” will assure the heating equipment only blows when it’s really heating the air.
You should also check your air filters. Typically air filters need to be changed every month to keep them from becoming dusty and clogged. If they aren’t changed often enough, the clogged air filter may restrict airflow into your furnace. If this occurs, it can overheat your system, causing the system to stop heating as a protection.
Your duct work could also be the source if it has leaks, connection troubles, or was designed incorrectly, which could permit warm air from the heating equipment to leak out. This would not only cause your heating equipment to blow cold air, it could dramatically run up your energy bills since your equipment is heating non-living space, and will have to work overtime to keep your home warm.
There are other reasons that your heating system could produce cold air including normal system wear and tear, among others. Especially if you've neglected annual furnace maintenance.
If your heating system is exhibiting any of these warning signs, call Service Experts Heating & Air Conditioning at 540-302-8645 or schedule an appointment online and we’ll send a technician to investigate your issue and get your home warm and comfortable again in no time.